AINA KSB 빠른 매뉴얼 - 페이지 2
{카테고리_이름} AINA KSB에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AINA KSB 3 페이지. Ptt smart button to work with kodiak-based apps (android)
페이지 인쇄
Putting your PTT Smart Button into
A
Kodiak-mode (KSB)
1.
Remove the battery from the PTT Smart Button.
2.
Press the Emergency button and keep it pressed while inserting the battery.
The LED will turn red.
3.
Release the Emergency button.
4.
Press the PTT1 button for 6 seconds.
5.
After releasing the PTT1 button, press the PTT2 button shortly. The red LED
will turn off and an orange LED will start flashing.
6.
Finally, press the PTT2 button for 6 seconds and release.
7.
The device's Bluetooth friendly name will now start with KSB instead of ASB.
To get your PTT Smart Button back to AINA mode (ASB):
1.
Remove the battery from the PTT Smart Button.
2.
Press the Emergency button and keep it pressed while inserting the battery.
The LED will turn red.
3.
Release the Emergency button.
4.
Press the PTT1 button for 6 seconds.
5.
After releasing the PTT1 button, press the PTT2 button shortly. The red LED
will turn off and an orange LED will start flashing.
6.
Finally, press the PTT1 button shortly.
7.
The device's Bluetooth friendly name will now start with ASB instead of KSB.
Emergency
PTT1 PTT2