CUSTOMGADZ mimicsG4 사용자 설명서 - 페이지 14

{카테고리_이름} CUSTOMGADZ mimicsG4에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CUSTOMGADZ mimicsG4 15 페이지.

9. Using the touchscreen switcher

The optional touchscreen tri-mode trigger inputs are used to force the OEM touchscreen to be used in

MimicsG4 mode. i.e. controlling your Smartphone/Tablet. Our latest version of the switcher is now fully

isolated for increased protection for your OEM system.

There are two inputs (Red and Black). The Red cable is a positive switching input and the Black is a

negative switching input. Applying a voltage between 1.5 and 16v to the Red wire will activate a "switch".

Connecting the black wire to 0v (GND) will also cause a switch. There is one more mode when you can

touch (short) the Red and Black wires together to also activate a switch. This mode is great for testing and

button control.

Red "switch" indicator.

Lights up when in Mimics Mode

To MimicsG4 via black

cable.

Button Trigger

Short these two wires

together to trigger

mimics mode.

Tips:

** It's possible to utilize any of the 3 switch modes to automatically "switch" to mimics mode. However,

you will need to find a constant signal that is active only when the mimics mode video source is selected.

** The switcher also has a feature that in the event that the MimcisG4 malfunctions or is disconnected,

the switcher will automatically default to OEM touch operation without requiring any power!

Touchscreen switcher

Negative Trigger

Connect this wire to a GND (Ov) source to

trigger Mimics mode.

Positive Trigger

Connect this wire to a voltage between

1.5 & 16v to trigger Mimics mode.

To 8Pin or 4-Pin SUB

Board.