DKnight Big MagicBox 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} DKnight Big MagicBox에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DKnight Big MagicBox 9 페이지.

4. How to pair your Bluetooth device with the DKnight Big MagicBox

1> Make sure the Big MagicBox is fully charged. (refer to section 3 in the manual)

2> Make sure that the Aux cable is plugged out when you are trying the Bluetooth function. If the

Aux cable is plugged in, the Bluetooth function will be disabled.

3> Turn on the Big Magicbox, a blue LED light will be turned on and you can also hear a "brief

message tone". And the blue LED will start flashing.

4> Turn on the Bluetooth function of your smart devices/PC.

5> Search available Bluetooth devices on your smart devices/PC. When the "BIG MAGICBOX"

appears on the list, please select it and your device will pair, connecting with the Big MagicBox.

Very few devices will request a password, if your device does, please enter"0000" (four zeros).

6> After the speaker being paired successfully, you will hear a "brief message tone" again. The blue

LED will stop flashing.

IMPORTANT NOTE:

The Big MagicBox could only pair with 1 device at once. When you turn on the Big MagicBox, the Big

MagicBox will be automatically connected with the last paired Bluetooth device if that Bluetooth device

is available and within range.

If the Big MagicBox successfully paired with the last device, it will prevent any other Bluetooth

devicefrom pairing to it. The best way is to disconnect the first device from the Big MagicBox before

trying to pair to another device.

To disconnect a device from the DKnight Big MagicBox, please press and hold the

the Blue light flashing. The Blue light flashing indicates the device is disconnected and the Big MagicBox is

in pairing mode.

for 5 seconds until