Alula RE310P 설치 매뉴얼

{카테고리_이름} Alula RE310P에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alula RE310P 4 페이지. Indoor motion sensor - pet immune dsc compatible

페이지 인쇄

Resolution Compatibles

The Indoor Motion Sensor

or when the external contact is opened. It is battery

powered and requires no installation tools. A Pyroflex

sensor with HighBar

leading pet immunity and catch performance.

Features

• Industry-leading pet immunity and catch performance

• Supports both motion zone and an external contact zone

• Mountable on walls or in corners

• 5 year warranty

Enroll

by placing the panel into wireless enrollment mode and

then sending an enrollment signal from the motion sensor.

The external contact can be enrolled by holding down the

tamper and installing the battery.

Options for sending an Enrollment Signal

• Remove the battery tab and cover to trip

tamper

Install

using the included 3M™ VHB™ tape to adhere the

motion sensor on a wall or in a corner. The tape should

be applied to the back when wall mounting or to the

back bevels when corner mounting. Alternatively, screw

mounting can be done by punching out the screw mounting

holes.

Installation Tips

• Mount 7.5 to 9.5 feet from the floor for an

optimal balance between catch performance

and pet immunity.

• Remove the cover and circuit board before

trying to punch out the screw mounting holes.

• Ensure the bug foam stays intact and snug

around the IR sensing element when re-

installing the circuit board.

External Contact

• Use a normally-closed contact because the

motion sensor will transmit an alarm when it

sees the external contact open.

• Do not use end-of-line resistors.

Use the panel installation guide to verify proper system setup.

RE310P Indoor Motion Sensor

-Pet Immune DSC

alarms when motion is sensed

signal processing allows for industry-

™

Compatible

™

Mounting Screw Holes

Ceiling

Floor

Cover-Securing Screw Hole