Alula RE611P 빠른 시작 매뉴얼

{카테고리_이름} Alula RE611P에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alula RE611P 4 페이지. Pet immune indoor motion sensor

The Pet Immune Indoor Motion Sensor

motion is sensed. It is battery powered and requires no

installation tools.

Features

• Five year battery life

• Quick peel and press mounting

• Mountable on walls or in corners

Enroll

by placing the panel into wireless enrollment mode

and then sending an enrollment signal from the sensor.

Alternatively, the sensor can be enrolled by entering its

8-character serial number in the AlulaConnect™ portal.

Options for sending an Enrollment Signal

• Remove the battery tab

• Remove the cover to trip the tamper

Install

using the included mounting tape to adhere the

motion sensor on a wall or in a corner. Alternatively,

screw mounting can be done by punching out the screw

mounting holes and using the included screws to mount

in the desired location.

Installation Tips

• Mount 7.5 feet from the floor.

• Remove the cover before trying to punch

out the screw mounting holes.

• It is recommended to ensure there is a tight

seal around the mounting holes to prevent

bugs from entering the sensor and causing

false alarms.

During normal operation

if motion is detected. This is done to maximize battery

life. Furthermore, when motion is detected and a signal

is transmitted to the panel, the sensor will not transmit

again for a period of three minutes.

Use the panel installation guide to verify proper system setup.

RE611P Pet Immune Indoor

Motion Sensor, Alula Encrypted

alarms when

the LED will not turn on even

Mounting Screw Holes

Cover Securing Screws