Alula RE606 매뉴얼

{카테고리_이름} Alula RE606에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alula RE606 2 페이지. Tilt sensor, connect+ encrypted

RE606 Tilt Sensor

typically used to sense the tilt of overhead garage

doors and windows. It will alarm when the sensor is

tilted more than 45 degrees.

Features

• Industry-leading wireless range and battery life

• Secure encrypted wireless transmissions

• 5-year warranty

Enroll

by placing the panel into wireless enrollment

mode and then removing the cover to send an

enrollment signal from the sensor. Alternatively,

the sensor can be enrolled by scanning its bar

code using the Connect+ Installer App or by

entering its 8-character serial number on the

interactive service provider's web portal.

Install

by mounting the sensor to the inside of

a door or window using the mounting screw

locations. For garage door installations, the

sensor should be mounted to the top panel of the

overhead door. CE installations must use a cover-

securing screw.

Tilt Detection

sensor exceeds a 45 degree angle.

If the sensor rotates further than

135 degrees, it is likely to remain in

a non-alarm state. For best results,

the sensor should rotate within 90

degrees to ensure an alarm state

occurs.

Use the panel installation guide to verify proper system setup.

is a full-featured security transmitter

occurs when the

RE606 Tilt Sensor

Connect+

™

Encrypted

Mounting

Screw

Holes

Cover-Securing

Screw Hole