Alula Connect+ 빠른 시작 매뉴얼 - 페이지 6
{카테고리_이름} Alula Connect+에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alula Connect+ 8 페이지.
Alula Connect+에 대해서도 마찬가지입니다: 하드웨어 설정 매뉴얼 (2 페이지)
페이지 인쇄
20
Test your Door
Window Sensors by
opening and closing the
protected windows and
doors with your security
system disarmed. Have
your Alula App open and
in hand to watch the
sensor status change
on screen, verifying the
door window sensors are
working correctly.
23
If you've already received cameras with your security system, you can add
them in the Alula App. First, make sure your local 2.4 GHz Wi-Fi network is active
on your smartphone. Unpack your cameras and plug them in for
two minutes. Tap the Cameras tab in your app, then press the
icon at the top right to begin enrolling a new security camera to
your system. Follow the product manual and setup wizard in the
Alula mobile App to complete camera installation.
Page 6
21
Test your Motion
Sensors. Step out of view
of the motion sensors
for three minutes and
tap the Security tab (1)
in the Alula App to show
your motion sensors on
screen. Walk past your
motion sensor or wave a
hand to see the motion
sensor status change to
Motion Detected (2) in
the Alula App to verify all
sensors are working.
22
Call your
local security pro to
activate your system.
+
24
Adjust your cameras
motion capture settings
in the Alula App, by
tapping on the GEAR icon
(1) above the live camera
view. Edit CAMERA
SETTINGS (2), and
MOTION DETECTION (3),
MOTION DETECT AREAS
(5), ensuring to SAVE (4,6)
your settings on each
screen.