Arton SPD-3.10 사용자 설명서 - 페이지 3

{카테고리_이름} Arton SPD-3.10에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Arton SPD-3.10 8 페이지. Optical smoke point detector

페이지 인쇄

3.1 The items supplied with the detector are shown in Table 2.

SPD-3.10 smoke optical detector

Manual

Package

B1 base

Manual

B2 base

Manual

B3 base

Manual

B4 base

Manual

B5 base

Manual

B6 base

Manual

B7 base

Manual

B8 base

Manual

B9 base

Manual

3.2 You can order bases without detectors.

3.3 MUSH-1, MUSH-2 modules can be supplied to connect the detectors with B01 or B1

bases to a 4-wire control panel if specially ordered.

3.4 K-5 mounting rings can be supplied to install detectors onto suspended ceilings if

specially ordered.

4.1 The detector consists of the detector itself and the base. The optical system, the signal

processing electronic unit and LED control circuit are in the plastic housing of the detector.

4.2 For the appearance, dimensions of the detector, dimensions of the B01 base please refer

to Figure 1, Figure 2.

4.3 The principle of detector's operation is based on the control of optical medium density.

When exceeding smoke density threshold, the electronic circuit shall issue the alarm signal.

4.4 The standby mode is indicated with the red flashing LED.

4.5 The indication of the fire mode depends on the AL the detector is connected to. The LED

is steadily lit in DC AL, and flashes in AC AL.

4.6. The test button is used to check functions of the detector.

4.7 The B1-B9 bases are constructed the same as B01 base, with the same dimensions (see

Figure 2). The only difference is that auxiliary screw contacts and coordination compartment (closed

with the lid) are fitted on the on the bases for connection to AL. The purpose, view, screw contacts

marking and wiring diagram are shown in the appropriate manuals for bases.

3. ITEMS SUPPLIED WITH THE DETECTOR

Name

SPD-3.10 detectors can be completed with B1-B9 bases

Quantity and type

of bases depend on

the purchase order

4. DESIGN AND PRINCIPLES OF OPERATION

Quantity

Up to 25 pcs.

B01 base included

1 pc.

Per 25 detectors

The quantity of bases in one

package corresponds with the

B1-B9 bases are supplied the

Table 2

Note

quantity of the detectors.

appropriate manuals.