Alula RE214 매뉴얼

{카테고리_이름} Alula RE214에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alula RE214 13 페이지. Honeywell compatible

페이지 인쇄

Resolution Compatibles

Smoke Alarm

that alarms when it detects smoke or

temperatures above 135°F (57°C).

Features

• UL217 and ULC531 listings

• Smoke and heat detection

• 5 year warranty

Quick Start Guide

1. Remove the mounting plate.

2. Pull the battery tab.

3. Restore the mounting plate and

twist it fully onto the smoke alarm.

Note: Enrollment is possible only

if the mounting plate is twisted

onto the smoke alarm.

4. Enroll Loop 1 of the smoke alarm

by placing the panel into wireless

enrollment mode and then hold

down the smoke's test button until

the smoke alarm beeps. Release the

test button until the sounder stops

beeping, and then press and hold

the test button again to enroll.

5. Remove the mounting plate and

refer to Sections 2 and 6 for

positioning and installation.

6. After mounting plate is installed

restore the smoke alarm onto the

mounting plate and fully test the

smoke alarm per Section 7.

To replace the battery,

smoke alarm from its mounting plate

and replace the batteries.

This manual should be read prior to use and retained for further information.

Verify proper enrollment and operation using your security panel's installation manual.

RE214 Smoke Alarm

Honeywell

is a fire-protection device

detach the

™

12 inches

minimum

Attention

Compatible

Pull Battery Tab

12 inches

minimum

Position Smoke Alarm

Test Smoke Alarm