Alula RE702 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} Alula RE702에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alula RE702 8 페이지. Indoor 360 camera

Setup

Step 1

Power-on

Plug the power cable into the camera, and then plug the power

adapter into an outlet as shown in the figure below. The LED

indicator will flash red and blue when the camera is ready for

setup.

Power Interface

Turn on the camera and let it power up. The camera will

completely rotate side-to-side and tilt up-and-down once.

Power Cable

LED Indicator Status

Flashing Blue: The network is

properly connected.

Solid Red: The device is activating.

Slowly Flashing Red: Invalid network

connection. Fastly Flashing Red: MicroSD

card or other error occurred.

Flashing Blue and Red: Camera is ready

for Wi-Fi setup.

Power Outlet