Alumax L-313TBX-34 매뉴얼 - 페이지 11

{카테고리_이름} Alumax L-313TBX-34에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alumax L-313TBX-34 17 페이지.

CONTINUED

1e. Place the bottom clips (6) for return panel

on the line traced previously following

dimension shown on the plan view.

Mark the screw location.

Remove temporary the bottom clips to drill

the base using #1/8" drill bit.

Put silicone onto the bottom clip bottom face

groove and around the hole. Finally , fasten the

bottom clips to the base using the provided

screws.Place the gaskets into bottom clips

slots.

1f.

Slide the xed front panel assembly into the

wall jamb (1) and through the bottom clips

slots.

Once the front xed panel has been

adjusted, secure the expander (2.3) to the

wall jamb (1) by way of a clamp so as to

keep the return panel level.

1g.

Fasten tightly the bottom clips set

screws (6).

1h.

By way of #8- 3/8 screws (10.2), as well as

screw caps (10.4), permanently secure the

wall jamb (1) to the expander (2.3).

INSTRUCTION MANUAL

203X, 313X, 313TBX

2.3

2.1

10.4

10.2