DKS 1520 series 설치 및 사용 설명서 - 페이지 14

{카테고리_이름} DKS 1520 series에 대한 설치 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DKS 1520 series 16 페이지. Stand alone card readers or controller
DKS 1520 series에 대해서도 마찬가지입니다: 매뉴얼 (2 페이지)

DKS 1520 series 설치 및 사용 설명서
The table list the many different print functions that the 1520 can perform. After each function is complete, a long beep will
sound.
Keypad Entry
2 2 + master code
*
0 6 + master code
*
4 0 + master code
*
3 2 + master code
*
0 2 + master code
*
2 7 + master code
*
5 5 + master code
*
3 7 + master code
*
3 1 + master code
*

3.1 Selective Transaction Print

In addition to the above print functions, the following programming sequence will print transactions for a selected month and a
selected day of the month.
1. Press
3 4 and enter the MASTER CODE. [
*
2. Enter the two-digit month (01 = January, 12 = December), then press
3. Enter the two-digit day of the month, then press
4. The printer will start to print the transactions stored for the selected month and day.
When complete, a long beep will sound.
Printer Connection
Printer Adapter
P/N 1587-010
(Sold Separately)
Use any SERIAL printer with an RS-232 interface.
Set the printer for 9600 baud, 1 start bit, 8 data bits, 1 stop bit.
Information on setting these parameters should be in your
printer manual.
Maximum wire run for the printer interface is 500 feet using
Belden 9418 wire, or equivalent.
12

SECTION 3 - PRINT FUNCTIONS

Prints all card codes currently stored in the system memory.
Prints all facility codes currently stored in the system memory.
Prints time zone information currently stored in the system memory.
Prints the current date and time.
Prints the programmed relay strike time.
Prints the status of timed anti-pass back (On or Off).
Prints the size of the memory chip currently installed in the 1520 (1000).
Prints the transactions currently stored in the transaction buffer.
Prints the status of the real time print mode (On or Off).
DoorKing
3 4 _ _ _ _ (beep)]
*
*
. [ _ _
(beep)]
*
*
500 ft MAX
1
2
3
4
5
6
7
8
9
10
MASTER
MASTER
CODE
CODE
Function
. [ _ _
(beep)]
*
11
12
13
14
15
16
17
18
1505
009
1000
1520-065-E-7-16