Alumax Lani L-523X-32 매뉴얼 - 페이지 18

{카테고리_이름} Alumax Lani L-523X-32에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alumax Lani L-523X-32 19 페이지.

CONTINUED

4e. Place the bottom clips (5) for return panel

on the line traced previously following

dimension shown on the plan view.

Mark the screw location.

Remove temporary the bottom clips to drill

the base using #1/8" drill bit.

Put silicone onto the bottom clip bottom

face groove and around the hole. Finally,

fasten the bottom clips to the base using

the provided screws. Place the gaskets into

bottom clips slots.

4f.

Slide the return panel assembly into the

wall jamb (7) and through the bottom clips

slots. Once the return panel has been

adjusted, secure the expander (8.1 & 9.1)

to the wall jamb (7) by way of a clamp so as

to keep the return panel level.

4g.

Fasten tightly the bottom clips set screws

(5).

4h.

Secure the wall jamb (7) to the expander

(8.1 & 9.1) by using.#8- 3/8 screws (11.2),

as well as screw caps (11.4).

8.1

9.1

11.2

11.4

INSTRUCTION MANUAL

503X, 513X, 523X, 523TBX