Artos Ryton MR12060P 설치 매뉴얼 - 페이지 2

{카테고리_이름} Artos Ryton MR12060P에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Artos Ryton MR12060P 6 페이지. Towel warmer plug-in version

USE

The RytonTowel Rack is intended for towel warming/drying, auxiliary heating or as a dec-

orative product.

The average heat up time is about thirty minutes, but would depend on

a ) the size of the unit and

b ) the initial temperature of the unit.

Typically the unit is programmed to be on an hour before expected use and remain on for

an hour afterwards.

The running cost of the towel rack, is usually similar to the running cost of lights in the

same room.

Clean with a soft cloth and use non abrasive cleaners.

INSTALLATION

Do not connect heater to the network before having read and understood the following

instructions.

Electrical and plumbing connections must be carried out by qualified personnel and the

unit should be securely mounted to the wall in a vertical position and such that it will not

fall into water if the brackets should loosen. Check with local regulations to verify whether

a GFI is required or not. The following pages are to assist in installation.

In case of damages or failures of the rail/connection, the towel rail should be returned to

the manufacturer or their distributor. The warranty from the manufacturer is NOT VALID

in case of improper use or installation. Product designed for use in Canada and USA on-

ly.

See page 4 for detailed installation steps.