DKT Comega IPLoA-MESH-AC-W 사용자 설명서 - 페이지 8

{카테고리_이름} DKT Comega IPLoA-MESH-AC-W에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DKT Comega IPLoA-MESH-AC-W 14 페이지. Wifi

Mesh installation via PDS cable, recommended

To achieve the best performance, you use a wired infrastructure as backbone such as:

•

Power grid (Power Line Communication, PLC)(not applicable to IPLoA-MESH-AC-W model)

•

PDS cabling (RJ-45)

•

Coax/MoCA (used for Cable-TV or broadband services) (not applicable to IPLoA-MESH-AC-W model)

In this guide we use Ethernet cable between the router and all the IPLoA-MESH-AC-W units.

Step 1: Install the first IPLoA-MESH-AC-W

The following items should be found in your

package:

Check that the 3rd party gateway works normally

and you are able to connect to it.

Plug in the supplied mains adapter to IPLoA-MESH-

AC-W

Plug in IPLoA-MESH-AC-W to the existing ADSL /

Broadband Gatway or your home Router with an

Ethernet cable in LAN socket.

If the IPLoA-MESH-AC-W can access 3rd party

gateway or your Router then the LAN LED will be

Green slow blinking (95% on/5% off).

The Wi-Fi LED should be Amber. That means the

Guide SSID is enabled.

You can now scan and connect to the Guide SSID,

the default Guide SSID is printed on the label of

each IPLoA-MESH-AC-W.

IPLoA-MESH-AC-W_User Guide_2017-06-12

Specifications are subject to change without notice.

DKT is not responsible for any typographical errors or wrong.

1 pcs

IPLoA-MESH-

AC-W

Gateway, delivery point

3rd party gateway

Page 8

1 pcs

Power supply

with USB-C-

connector

Cable or Wi-Fi

3.8s

0.2s

off

Amber