Artos C05688W 설치 매뉴얼 - 페이지 4

{카테고리_이름} Artos C05688W에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Artos C05688W 6 페이지. Towel warmer hardwired version

1. Check that all the installation pack contents have been received. There should be 3

items as shown below:

Brackets

2. DISCONNECT POWER SUPPLY. Connect timer to power supply. The timer can be

placed anywhere in the room ( recommended beside the light switches ) . Refer to in-

structions provided with timer for wiring details.

3. Determine location of towel warmer and provide a single gang electrical box 4 " below

bottom right of towel warmer ( see spec. sheet ) . Note: where possible, attach at least

two of the brackets to a firm wall stud.

4. Attach bracket pieces 1,2,3, and 4 to towel warmer using diagram 1 below as a guide.

Typically the brackets are positioned between the 2nd and 3rd bars from the top and

bottom. To allow maximum hanging space for the towel, position brackets as near to the

edges as possible.

Diagram 1

#2 Front Cylinder

#8 Cap

Head

#1 Securing

Bolt

#3 Rear Cylinder Head

#4 Inner Rear

Cylinder

Horizontal Bars

INSTALLATION STEPS

Hardwire Kit

#7 Locking Screw

#5 Wall Fixing

Screw

#6 Outer Rear Cylinder

Timer