Aluprof DM55M-80/12 매뉴얼 - 페이지 5

{카테고리_이름} Aluprof DM55M-80/12에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aluprof DM55M-80/12 17 페이지.

1. Electrical connections

Power 230V / 50 Hz

Brown wire - phase (direction 1)

Black wire - phase (direction 2)

Yellow / green wire - ground

2. Setting the limit swiches

Blue wire - neutral

1. Start the closing mode of the shutter until it stops in the requested position

(if the roller shutter is fully closed and the motor is still working, it should be stopped and proceed to step 3).

2. Regulate the knob (marked ⇧ ) in the (+) direction set the requested position of the shutter.

3. Raise the shutter and regulate the knob in the (-) direction and repeat the procedure if the requested position is crossed.

1. Start the opening mode of the shutter until it stops in the requested position

(if the roller shutter is still opening and the motor is still working it should be stopped and proceed to step 3).

2. Regulate the knob (marked ⇩ ) in the (+) direction set the requested position of the shutter.

3. Raise the shutter and regulate the knob in the (-) direction and repeat the procedure if the requested position is crossed.

- 5 -