Aluprof DC1690 프로그래밍 매뉴얼 - 페이지 3

{카테고리_이름} Aluprof DC1690에 대한 프로그래밍 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aluprof DC1690 4 페이지. Plaster switch with radio receiver
Aluprof DC1690에 대해서도 마찬가지입니다: 운영 매뉴얼 (2 페이지)

페이지 인쇄
Aluprof DC1690 프로그래밍 매뉴얼
PROGRAMMING MANUAL FOR UNDER PLASTER SWITCH WITH RADIO RECEIVER DC1690
4. MEMORIZING THE TRANSMITTER
Press and hold simultaneously "UP" and "DOWN" buttons with
power supply on.
Press the „UP" button on the
transmitter.
5. ERASING ONE TRANSMITTER.
Press and hold simultaneously "UP" and "DOWN" buttons with
power supply on.
Press the „DOWN" button on the
transmitter.
We reserve the right to any technical change.
Valid on 2022.02.09
Indicator light flashes
3 times.
indicator light starts flashing - release
Indicator light flashes
3 times.
After 3 seconds, when the indicator
light starts flashing - release the
buttons.
The transmitter has been added.
After 3 seconds, when the
the buttons.
The transmitter has been
deleted.
Press "STOP" button.
The indicator light turns on.
Press "STOP" button. The indicator light
turns on.
3