Cutting Edge DVRA8 사용 설명서

{카테고리_이름} Cutting Edge DVRA8에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cutting Edge DVRA8 2 페이지. Usb-dvr (4gb)

Diagram

1. Reset button 2. Take photos or video 3 Turn on/ Off 4. Camera 5. Microphone 6. US connector

card slot 8. Indicator

Turning the DVR ON/ OFF



Press and hold Button 3 for about 2 seconds. The DVR will vibrate for about 5 seconds and the indicator light

will be solid red. The DVR is now in standby mode.



When the DVR is on press and hold Button 3 for about 2 seconds. The DVR will vibrate 2 times and the red

indicator light will turn off.

Taking Photos

 Turn the DVR on

 When in stand-by mode press and release button 2. The DVR will vibrate and the red indicator will turn off and

back on indicating that a photograph has been taken.

Taking videos

 Turn the DVR on

 When in stand-by mode press and hold button 2 for about 2 seconds. DVR will vibrate 2 times and the indicator

light will flash 2 times. You are now recording video.

Motion Detection

 Turn the DVR on

 When in stand-by mode press and release Button 3. The indicator light will flash six times and the DVR will

vibrate 6times and the indicator light will turn off.

Saving video files

 Press and release button 3. The indicator will flash 3 times and the unit will vibrate 3 times as the file is save.

Udisk

 Turn the DVR off, insert into empty USB port on your computer. The indicator light will turn on and the unit

will vibrate about 5 seconds you can now find the DVR in the My Computer folder. Your computer will

automatically assign the drive a letter (Normally E: )

Time Setting: The DVR can display the recording time on the video/ photo file in the format of year.month.day and

hour:min:second.

 Create a notepad file with the name "time.txt" and enter the current date and time in the format: yyyy.mm.dd

hh:mm:ss.

(4GB)

USB-DVR

Model # DVRA8

Instruction Manual

7. TF