DLab Thermo Control HC110-Pro 사용자 설명서 - 페이지 5

{카테고리_이름} DLab Thermo Control HC110-Pro에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DLab Thermo Control HC110-Pro 19 페이지.

clean, non-slip, dry and fireproof surface. Do not

operate the instrument in explosive atmospheres,

with hazardous substances or under water.

•Temperature must always be set at least 50℃

lower than the fire point of the media used.

•Be aware of hazards due to:

- Flammable materials or media with a low

boiling temperature

- Overfilling of media

- Unsafe container

•Process pathogenic materials only in closed

vessels.

•Check the instrument and accessories prior to

each use.

•Do not use damaged components. Safe operation

is only guaranteed with the accessories provided

by the manufacturer. Accessories must be securely

attached to the device and can't come off by

themselves. Always disconnect the plug before

fitting accessories.

•The instrument can only be disconnected from the

main power supply by pulling out the main or the

connector plug.

•The voltage stated on the label must correspond

to the main power supply.

• Ensure that the main power supply cable does

not touch the dry bath. Do not cover the device.

• The instrument may only be opened by experts.