DLab Thermo Mix HCM100-Pro 사용자 설명서 - 페이지 13

{카테고리_이름} DLab Thermo Mix HCM100-Pro에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DLab Thermo Mix HCM100-Pro 19 페이지.

5.3.3 Program with Saving mode

Programming method is similar with Multiple Step

without Saving mode. After the programming

complete, long push the adjustable knob, program

name characters flash (refer to the red part in

below figure). Rotate the Adjustable knob to

input the number of the name, then push the

adjustable knob to complete the input. The program

saving is complete now.

Temp.

Speed

Timer

P1 5-2

Prog.

Prog. shows P1, 5-2，means the program and step

Set

Actual

30.5

1500

07:00

number. Refer to the figure, there are 5 steps totally,

now it's the second step.

5.3.4 Load Program

In the power on state, long push the prog.

button , enters the load program mode. Rotate the

adjustable knob to show the saved program, from

P1 to the last, at most 9 programs. Switch to the

program you want, and short push the prog.

Button to check the program in detail. Then

push the adjustable knob to start the program.

5.3.5 Single function running

If Temp. is set to ---.-, then it means working

without temperature control function. If Timer is set

to 00:00, it means work continuous. If speed is set

to -----, it means work without mixing function.