ARTRAY ARTCAM-150P III Series 지침 책자 - 페이지 11

{카테고리_이름} ARTRAY ARTCAM-150P III Series에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. ARTRAY ARTCAM-150P III Series 11 페이지. 1.5m pixels progressive, usb2.0 color(bw) ccd camera
ARTRAY ARTCAM-150P III Series에 대해서도 마찬가지입니다: 지침 책자 (18 페이지)

페이지 인쇄

1. Specifications

Refer to the restrictions below when using ARTCAM/ARTCNV

1. USB host chip

Use the USB host chip which is Intel authorized USB2 host controller.

Make sure if you find "Intel®82801DB/DBM USB2 ENHANCED HOST CONTROLLER" on USB

Controller window according to the following procedure.

"Control Panel" -> "Hardware" -> "Device Manager" -> "USB Controller"

NOTICE: We cannot guarantee the proper operation of this camera/converter when you use the

external USB host card due to its design and its transfer rate. The transfer speed is slow because

it is connected to host via PCI bus. In case of using ARTCNV, color transfer is not available.

( Only Monochrome.)

2. Hyper Thread Bios

Disable this function in case of PC with a built-in Intel hyper thread.

3. With the other USB2.0 hardware

You may be unable to use the other USB2.0 hardware such as Memory stick, External HDD,

External DVD, CDROM and etc. when you use this camera/converter due to bulk transfer mode

of this camera/converter.

It is because bulk transfer device is not recognized, especially in case of Cypress control chip,

due to handshaking of USB port and PC bios.

It is hard to solve this matter for the reason that it is related to the lower firmware of control

chip and PC bios.

As a recommended measure, add PCI USB host card on PC and use its USB ports for the

external USB hardware.

4. Extension of USB2.0 cable

We cannot guarantee the proper operation of the extension cable even though it is compatible

with USB2.0 except the extension cables below we have confirmed its proper operation because

USB transfer frequency of this camera is 192MHz.

For the recommended extension cable, we refer you to our sales dep't. (TEL: +81-3-3389-5488)

In case of the trouble using the extension cable, you may have "Camera error", "Disappearance

of Device driver", " Operation error in high-speed mode", "Unknown USB device" and etc.

ARTRAY CO., LTD. 2007/08/27