Aluratek Cinecam AHDVC02F 빠른 시작 매뉴얼 - 페이지 2
{카테고리_이름} Aluratek Cinecam AHDVC02F에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aluratek Cinecam AHDVC02F 2 페이지. Hd dv camcorder
Aluratek Cinecam AHDVC02F에 대해서도 마찬가지입니다: 제품 참조 카드 (2 페이지)
페이지 인쇄Operating Instructions
STEP 1. Installing the Battery:
The battery is not fully charged and must be fully charged before first use. It is
recommended to charge the battery for a minimum of 2 hours.
1. Open the battery cover.
2. Insert the 3.7V Li-ion rechargeable battery into the camera.
3. Replace the battery cover.
STEP 2. Inserting a Memory Card (not included)
Follow the instructions below to insert the optional SD / SDHC memory card into
the camera.
1. Turn off the camera.
2. Insert the SD card into the camera.
Note: There is only one correct direction to insert the SD memory card into the slot. Do not force the
card into the slot, or else it may damage both the camera and the SD memory card.
Note: Most memory cards come pre formatted. If your memory card is not formatted, please follow
these simple procedures.
2. Thumbnail views will be displayed. Use (▲,▼, or
,
) to select photo / video.
3. Press the （
） button to view or playback your thumbnail selection.
4. During photo playback, push the (▲or ▼) buttons to zoom in or out.
5. While zooming, press (
,
) buttons to move left or right to view a specific part
of the picture
6. When viewing photo in full screen, press (
,
) to view previous or next photo.
7. In viewing a video clips, Press the (
) button twice to start playing the video
and press again to pause.
8. During video playback, press the (
) button to fast forward or press the (
button to rewind.
STEP 5. Delete Photographs and Video Clips:
Follow the instructions below to delete a photograph or video clip.
1. Press the PLAYBACK (
) button once to enter the photo / video clip playback
mode then select the photograph or video that you wish to delete.
2. Press the MENU button to enter the delete mode.
3. Select "Delete One" and press (
).
4. Press the (
,
) button to select whether to delete the selected file,
then press the （
） button to confirm.
5. Press the MODE button to exit.
Troubleshooting
Problem
Cause
Can not power on the unit
Low battery power. Battery placed at wrong
polarities.
Photos can not be saved when
The memory card hasn't been formatted
taking pictures.
correctly or memory is full.
Can not find removable disk after
connecting the camera to the
Connection failure.
computer.
Photos are blurry
1. AHDVC02F is not held steadily
2. AHDVC02F lens is dirty.
3. AHDVC02F is set to the wrong focus mode.
If you need further assistance, please contact the Aluratek support department for troubleshooting prior to returning this device.
E-mail: [email protected]
Local (Irvine, CA): 949-419-6504
Web: www.aluratek.com/support
Toll free: 1-866-580-1978
Formatting the Memory or SD Card:
Warning: Formatting will erase everything on the card
1. In photo / video set up mode, select SETUP icon by pressing (
enter basic set up mode.
2. Select FORMAT icon by pressing the (▼) button and press （
confirm, select YES by pressing the (
) button.
3. Press the （
） button to confirm formatting the SD card.
Setting the Resolution:
AHDVC02F can be set to different resolutions.
VIDEO
1. Press the MENU button in video mode to enter the video set up menu.
2. Select the RESOLUTION by pressing the (▼) button and press the （
button to enter the resolution selection.
Connect to TV
For high
TV
definition TV
HDMI
)
Yellow
For standard
Red
definition TV
White
TV
Solution
Replace or install the battery correctly.
If the memory is full, use a different memory card. Format the memory card if it was
not formatted.
Warning: Format will erase everything on the card.
Make sure all cable connections are secured and restart the computer if necessary.
1. Hold AHDVC02F steadily until it beeps when taking video photo.
2. Clean the lens with soft dry cloth.
3. Set the macro/normal mode according to the distances of subject.
3. Different resolutions will be displayed. Select the desired resolution by using
the (▲) or (▼) button and press the (
1080P30 (1440x1080) 720P30 (1280x720), WVGA (848x480), QVGA (320x240).
PHOTO
) button to
1. Press the MENU button in photo mode to enter the photo set up menu.
2. Select the SIZE icon by pressing the (▼) button and press the （
） button to
to confirm.
3. Different resolutions will be displayed. Select the desired resolution by using
the (▲) or (▼) buttons and press the REC button to confirm the selection.
3.0M (2048 x 1536), 5M (2592 x 1944), 8M (3200 x 2400), 12M (4000 x 3000).
STEP 3. Taking Video or Photographs:
1. Flip open the LCD.
2. Press the MODE button to select the photo mode (
）
Connect to Computer
Software Installation:
1. Insert CD to your computer.
2. Select "Install MediaImpression"
3. Follow the onscreen instruction to install the
software.
Connect to computer:
1. Power on AHDVC02F.
2. Connect AHDVC02F to the USB port on your
computer using the included USB cable.
3. AHDVC02F will appear on your computer as a
"Removable Drive" in "My Computer".
4. You can manage your pictures/videos using the
MediaImpression software or click on the
"Removable Drive" directly.
TV
Radio and TV Interference Statement
WARNING!!! This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by whatever measures may be
required to correct the interference.
3. Depending on the distance to the object being photographed, use Macro switch
) button to confirm the selection.
to adjust the distance. Select the flower symbol (
graph (11cm –18cm). To take video or photograph of surroundings or people
(0.5m - infinity), set the Macro switch to Normal mode (
4. Use the LCD screen to aim the object you wish to take video or photograph.
5. Press the （
） button once to take the picture, or press the （
start / stop video recording.
） button
Caution: 1) Taking picture for fast-moving object is not recommended.
2) Image may be distorted when taking picture in a moving vehicle.
Zoom IN and OUT:
AHDVC02F has 4X zoom. (2X zoom for 1080p recording mode).
Zoom in or out by pressing the ▲or ▼ button.
) or video mode (
) .
STEP 4. Playback Photographs / Videos Clips :
1. Press the PLAYBACK (
mode, press (
) again to select either PHOTO / VIDEO.
How to upload to Youtube from MediaImpression:
1. Select the video that you like to upload
3. Complete your YouTube
2. Click on the YouTube icon in menu bar
account information
Warranty
Aluratek warrants this product against defect in material or workmanship for 1 Year
from the date of purchase.
This warranty becomes invalid if the factory-supplied serial number or "warranty void"
sticker has been removed or altered on the product.
This warranty does not cover:
A) Cosmetic damage or damage due to acts of God
B) Accident, misuse, abuse, negligence or modification of any part of the product.
C) Damage due to improper operation or maintenance, connection to improper equipment,
or attempted repair by anyone other than Aluratek.
D) Products sold AS IS or WITH FAULTS.
IN NO EVENT SHALL ALURATEK'S LIABILITY EXCEED THE PRICE PAID FOR THE
PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THE PRODUCT, IT'S ACCOMPANYING
SOFTWARE, OR IT'S DOCUMENTATION.
Aluratek makes no warranty or representation, expressed, implied, or statutory, with
respect to it's products, contents or use of this documentation and all accompanying
software, and specifically disclaims it's quality, performance, merchantability, or fitness for
any particular purpose. Aluratek reserves the right to revise or update it's product, software
or documentation without obligation to notify any individual or entity.
) to take a close up photo-
).
） button to
) button once to enter the photo / video playback
4. Fill in the video info and click "Upload"
AHDVC02F
AHDVC02F
AHDVC02F