ARTRAY ARTCAM-640P-THERMO 지침 책자 - 페이지 10

{카테고리_이름} ARTRAY ARTCAM-640P-THERMO에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. ARTRAY ARTCAM-640P-THERMO 10 페이지. Thermal infrared camera

7. Systems Requirements

7.1 Recommended Specifications

●Intel Chipset ICH series (6 or later version)

●CPU: Intel Core2duo 2.4GHz or higher

●Memory：≧512MB

●Operating System: Windows XP(SP2) or later version

7.2 Minimum Specifications

●USB2.0 Enhanced Host Controller

●CPU: Intel Pentium4 1.7GHz or higher

●Memory：≧256MB

●Operating System: Windows XP or later version

Caution

■Please refer the restrictions below when you use ARTCAM.

(1) Recommended System Requirements

If the system specifications do not meet the requirements recommended above, it may be difficult to run at

the maximum frame rate, especially at 48MHz high-speed mode.

(2) Connection of Multiple USB Devices

Please be aware that depending on the specifications of the user's PC, it may be difficult to supply the

power to the USB devices when multiple USB devices are connected.

(3) USB2.0 cable Extension

We cannot guarantee the functionality of the USB2 camera if the user adopts USB2.0 extension cables or

repeaters which are not confirmed by us. With the extension cables or repeaters, the bandwidth of transfer

may differ, and thus caused malfunctions such as a low frame rate or recognition failure on the camera.

What may cause the problem is that the regulation of the power lines becomes not enough, and so causes

impudence mismatch on data signals.

*For the recommended extension cable, please contact our sales department. (TEL: +81-3-3389-5488)

ARTRAY CO., LTD.

1-17-5 Kouenjikita, Suginami-ku, Tokyo 166-0002 Japan

Tel: +81-3-3389-5488

- 10 -

Fax: +81-3-3389-5486

URL: www.artray. us