ARTRED AR50 운영 매뉴얼 - 페이지 4

{카테고리_이름} ARTRED AR50에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ARTRED AR50 12 페이지.

This machine is powered by DC power supply. It is absolutely impossible to make a

wrong polarity connection of batteries. Once connected with the machine, it will

cause damage to all electrical parts of the machine.

Batteries of different specifications and brands have matching chargers. It is

possible to damage batteries or even cause battery burst by using unmatched

chargers casually. We must attach great importance to it.

Maintenance of machines must be carried out by specialists in the special

maintenance department. If the machines are repaired and disassembled without

authorization, life injury and damage may occur to the machines. The machine has

been debugged before leaving the factory. After maintenance and disassembly, it is

necessary to ensure that all fasteners are not loosened. The adjusting parts are

adjusted according to the requirements and locked.

The electrical components of the machine may be short-circuited in the

presence of water or in the humid environment. Ensure the drying of electrical

components, wipe the machine clean after use and park in a dry environment.

The charging area should be kept ventilated. The charger should use three-

core power cord and power supply with grounding wire. In order to prevent

electric shock accident to the maximum extent, please install leakage

circuit breaker.

No items are allowed on the battery!

Please do not inject water into the air intake of the water-absorbing motor

when cleaning the machine!

Failure to pay attention to the labels and instructions on the machine will

result in injury. Be sure to read all the labels on the machine before

operating.

The machine can't run on rough ground and slopes, and the operator can't

sit on the machine.

- 3 -