Alutech AM1-PP/40-15 운영 매뉴얼 - 페이지 9

{카테고리_이름} Alutech AM1-PP/40-15에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alutech AM1-PP/40-15 17 페이지. Tubular motors

페이지 인쇄
Alutech AM1-PP/40-15 운영 매뉴얼
AM0, AM1, AM1-PP, AM2, AM2-PP Series
1. General Data and Description
Read this manual carefully and keep it in a safe place for future reference.
Installation, connection and commissioning should be performed by qualified and
trained technicians in accordance with the safety standards and regulations.
For safety reason follow these instructions carefully. Incorrect installation of the motor
could cause personnel injury or property damage.
It is prohibited to make unauthorized changes to the product or use for any other pur-
pose.
Switch the motor off when performing works (installation, repair, maintenance, clean-
ing, windows washing, etc.).
Packing should be disposed of in accordance with applicable regulations.
These motors are designed for the automation of roller shutter systems (roller shutters). They
comprise the induction condenser motor with thermal protection, brake, gear box and electrome-
chanical limit switches. The motors of AM1-PP and AM2-PP series are equipped with manual
emergency control mechanism. AM0 series motors are installed in octagonal shafts of 40mm size.
AM1 and AM1-PP series motors are installed in octagonal shafts of 60mm size. In order to install
these motors into shafts of 70mm size, special additional kit of adapter and ring should be
bought. AM2 and AM2-PP series motors (60Nm and 80Nm) are installed in octagonal shafts of
70mm size. In order to install these motors into shafts of 102mm size, special additional kit of
adapter and ring should be bought. AM2 and AM2-PP series motors (100Nm and 120Nm) are in-
stalled in octagonal shafts of 102mm size. In order to install these motors into shafts of 70mm
size, special additional kit of adapter and ring should be bought.

2. Technical Characteristics

These technical characteristics are applied to the ambient temperature of 20°С (±5°С)
and supply voltage of 230V/50Hz.
Table 1 – Technical characteristics for motors of AM0, AM1, AM1-PP, AM2, AM2-PP series
Models
AM0/06-28
AM0/10-17
AM0/10-17D
AM1/10-15
AM1/20-15
AM1/30-15
AM1/40-15
AM1/50-12
AM1-PP/20-15
AM1-PP/30-15
AM1-PP/40-15
AM1-PP/50-12
AM2/60-15
AM2/80-15
AM2/100-12
AM2/120-9
AM2-PP/60-15
AM2-PP/80-15
AM2-PP/100-12
AM2-PP/120-9
OPERATION MANUAL
Tubular Motors of
Shaft
Torque,
rotational
N·m
speed, rpm
6
28
10
17
10
17
10
15
20
15
30
15
40
15
50
12
20
15
30
15
40
15
50
12
60
15
80
15
100
12
120
9
60
15
80
15
100
12
120
9
Parameters
Max. number
Power con-
of shaft
sumption,
rotations
36
17
22
9
Weight,
kg
W
1,67
121
1,66
1,55
112
2,41
145
2,6
191
2,94
198
3,13
205
3,19
145
3,38
191
3,72
198
3,9
205
3,91
310
5,68
330
6
345
6,1
350
6,35
310
7,52
330
7,86
345
8,27
350
8,37
L1,
L2,
mm
mm
468
442
468
442
388
361
470
450
470
450
540
520
540
520
540
520
540
520
600
580
600
580
600
580
638
618
638
618
638
617
638
617
736
719
736
719
736
717
736
717