DLO TransDock micro 빠른 시작 매뉴얼 - 페이지 6
{카테고리_이름} DLO TransDock micro에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DLO TransDock micro 11 페이지. Fm transmitter for ipod
DLO TransDock micro에 대해서도 마찬가지입니다: 사용자 설명서 (11 페이지), 사용자 설명서 (11 페이지), 사용자 설명서 (11 페이지), 빠른 시작 매뉴얼 (11 페이지), 사용자 설명서 (11 페이지), 사용자 설명서 (11 페이지)
페이지 인쇄DLA57878-17_manual_GM2_080916:Layout 1
Settings + Features
TransDock micro Settings
To enter the
Settings Menu
press and hold the dial. Then, turn the dial to scroll
through the various settings, and press the dial to enter your desired setting.
Turn the dial to the right or left to view the chosen setting options, and press
the dial to confirm your selection. Once you've made your selection, you will
return to the
Settings
Menu. Press the center button to exit the Settings Menu.
NOTE:
TransDock micro will automatically exit the Settings Menu after a few
seconds of inactivity.
Settings include:
PRESET STORE
Preset Store
allows you to save up to four preset stations. The default presets
are 88.1, 94.9, 100.9, and 107.9.
To store your own preset stations, follow these simple steps:
1. Using the dial, tune TransDock micro to the station you'd like to set –
turning right to tune to higher stations and left to tune to lower stations.
2. Press and hold the dial to enter the
3. Once in the
Settings
Menu, scroll to
Next, scroll to and select the preset number
SET
4) and press to select.
10 |
DLO TRANSDOCK MICRO USER GUIDE
9/17/08
5:28 PM
Settings
Menu.
Preset Store
and press the dial to select.
(SET
1,
SET
2,
SET
3, or
Page 10
4. Repeat steps 1-3 to store the remaining presets.
NOTE:
Your new preset will override the preset that was last saved, including
the default presets.
PRESET MODE
Preset Mode
gives you the option to scroll through your presets in
Manual
Mode.
To turn Preset Mode on, follow these simple steps:
1. Press and hold the dial to enter the
2. Scroll to
Preset Mode
and press the dial to select. Then choose
On
and press to select. Now you can scroll through the four presets (P1, P2,
P3, P4) in
Manual
Mode.
3. Leave TransDock micro on the desired preset and tune your radio to the cor-
responding frequency to begin broadcasting.
Settings
Menu.
Preset Mode
| 11