Alvarado SLT 설치 지침 및 유지보수 매뉴얼 - 페이지 5
{카테고리_이름} Alvarado SLT에 대한 설치 지침 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alvarado SLT 16 페이지. Waist high slimline security turnstile revision 1.6 – december 2017
페이지 인쇄Overview of Installation / Slab Requirements
Overview of Installation Steps:
A.
Determine turnstile locations taking into account power and activation wiring (if applicable)
B.
Anchor turnstile
C.
Connect Power (if applicable)
D.
Connect Activation Wiring (if applicable)
Parts required (Supplied by Alvarado)
• 3 each mounting bolts
• 3 each washers
• 3 each Anchors
Turnstile Location and Barrier Spacing
Verify layout location.
The turnstile arm should be approximately 2" from the next unit or outside barrier.
NOTE
Page 5
SLAB REQUIREMENTS
MINIMUM THICKNESS: 4" LEVEL SOLID CONCRETE
DO NOT INSTALL ON ASPHALT
For Assistance: [email protected] +1 (909) 591-8431
SLT – Waist High Slimline Security Turnstile
Tools required
• Heavy Duty Drill
• 5/8" Concrete Drill Bit
• 3/8" Torque Wrench
• Hammer
• Shop Vac
• Tape Measure
• Chalk
• Shim Material
• Safety Glasses
PUD1570R2-0