Alvarado Supervisor 500 설치 지침 매뉴얼 - 페이지 16
{카테고리_이름} Alvarado Supervisor 500에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alvarado Supervisor 500 19 페이지. Barrier-free optical counting turnstile
Battery-Powered Counters (Optional)
Optional battery-powered counters are integrated into the turnstile cabinets [Figure 33]. One counter is required per direction
of travel. Each passage through the turnstile generates a count. Counters can be ordered as reset or non-reset variants. Reset
counters can be reset to "0" using a key-operated switch integrated into the turnstile cabinet. Non-reset counters will automatically
reset at 1,000,000 counts.
Figure 33
Counter Locations (Two-Lane Configuration)
Counter
LANE 2
Exit
Counter
Slave
Cabinet
To reset the counter:
1.
Insert barrel key into the key switch and turn key in a
clockwise direction [Figure 34].
Page 30
For Assistance: [email protected] +1 (909) 591-8431
SU500 Installation Instructions
Entry
Entry
Counter
LANE 1
Exit
Counter
Center
Cabinet
Figure 34
Counter with Optional Reset Key Switch
Reset Key
Counter
Switch
SU500 Installation Instructions
Finish the Installation
Complete the following steps below only if the primary power, crossover cable, and access control wiring is connected.
1.
Reinstall the lids and secure with the lid mounting screws.
2.
Reinstall the end panels and secure with the end panel mounting screws.
Post-Installation Checklist
1.
Power On
SU500 boots up successfully.
2.
Lane Functionality
Lane generates count outputs in the entry/exit direction.
Lane alarms when the sensors are blocked.
Master
Cabinet
3.
Attachment
Cabinet lids and panels are securely fastened to the turnstile.
4.
Wipe Down Turnstile
Stainless Steel – Wipe down stainless steel with a damp cloth or use Alvarado's recommended
commercial products.
Powder Coated - Wipe down power coated surfaces with a damp cloth.
5.
Manuals Handoff
Provide the SU500 Installation Instructions to the project or site manager.
PUD1456R5-0
PUD1R5-0
For Assistance: [email protected] +1 (909) 591-8431
Page 31