Alvarado MSGX-E 설치 및 유지보수 지침 매뉴얼 - 페이지 10

{카테고리_이름} Alvarado MSGX-E에 대한 설치 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alvarado MSGX-E 20 페이지. Full height maximum security gate

Magnetic / Electric Strike Lock Wiring

If a magnetic lock is used, the lock and wires are located on the gate frame towards the top of the gate door.

[Figure 5]

Magetic Lock (Standard):

Voltage:

Current:

Switch Contact:

Holding Force:

Wire Lead:

• Red -

• Black -

If an electric strike lock is used, (2) two white wires attached to the lock will be coming out of the wire access hole.

Either side of the access hole can be plugged if necessary. A 1/2" pipe thread hole plug is supplied. [Figure 6]

Electric Strike Lock (Standard):

Voltage:

Current:

Switch Contact:

Wire Lead:

• Red -

• Black -

NOTE

• Normally Open refers to Fail Lock & Normally Closed refers to Fail Safe.

• Cable runs are not to exceed 50 feet.

Page 10

+12VDC

0.25A

Normally Closed

1200lbs.

+12VDC Input

Ground

+12VDC

0.25A

Normally Open

Normally Closed

+12VDC Input

Ground

For Assistance: [email protected] +1 (909) 591-8431

MSG Installation and Maintenance Instructions

Magnetic lock and wires

Wire access hole

Figure 5

Figure 6

PUD1201R5-0