Alvarado SSG 설치 및 유지보수 지침 매뉴얼 - 페이지 8

{카테고리_이름} Alvarado SSG에 대한 설치 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alvarado SSG 10 페이지. Bi-directional waist high security gate

Maintenance

Alvarado recommends performing the maintenance steps below every (60) days. Maintenance should be performed

more frequently in high use applications and/or in dusty or humid environments.

1. Anchoring: Check that the anchors are tensioned to 20 ft-lbs. Tighten if necessary. Clean any accumulated dust

and dirt from the anchors and flange.

2. Leveling: Verify the hinge post and gate arm are horizontally and vertically level. Shim as necessary. Ensure the

gate arm and hinge post form a 90° angle.

3. Overtravel: Check the gate for overtravel. Overtravel is defined as the gate swinging in excess of 90° from the

closed position. Overtravel can lead to the gate arm colliding with adjacent fixtures, potentially causing damage to

the fixture and/or the gate. If the gate overtravels, refer to the Adjusting Swing Limit section on page 6.

The CSG,SSG, and CFG gates are equipped with two infill bars for mounting signage.

Fig. A1

SSG with Custom Sign

A custom sign can be mounted to the CSG/SSG.

(Custom sign not included)

Page 8

PUD3570R2-0

CSG/SSG/CFG Installation and Maintenance Instructions

For Assistance: [email protected] (909) 591-8431

Fig. A2

CFG with 8" x 12" Handicapped Sign

The CFG model comes with a clear acrylic sign

with a handicapped logo.

Created on: 10/7/2013