Alvarado VSGX 설치 및 유지 관리 지침 매뉴얼 - 페이지 12

{카테고리_이름} Alvarado VSGX에 대한 설치 및 유지 관리 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alvarado VSGX 13 페이지. Waist-high security gate

Maintenance

General maintenance best practices:

•

Inspect all gates one or two weeks after they are installed to ensure they are operating properly. Inspect the gates again about

sixty days after they are installed.

•

The frequency of regular maintenance is determined by gate usage and environment. However, Alvarado recommends regular

maintenance be performed at least once per year. Perform maintenance more frequently if the gates are used frequently or are

installed in humid or dusty environments.

Check the maintenance points identified in the image below to ensure proper gate operation.

Lower Pivot Spring

Floor Is Level

Remove the base covers and check gate levelness and anchor tension when performing maintenance. Ensure the anchors are

tightened to 20 ft.-lbs. Clean any accumulated dirt or dust.

For VSGX units, inspect all wires and contacts for signs of wear, abrasion, or exposed metal parts that could lead to a short.

Replace as needed.

Check the top bracket hinge and lower pivot spring hinge point for debris and remove if found.

For VSGX units, verify the electric lock mechanism is aligned properly. When properly aligned, the gate arm should lock

automatically when it returns to its home position while the gate is powered.

Page 12

Top Bracket Hinge

Hinge Post Anchoring

For assistance: [email protected] +1 (909) 591-8431

VSG/VSGX Installation & Maintenance

Gate Arm Is Level

Latch Post Anchoring

PUD2996R4-0