DLS D-Series 소유자 매뉴얼 - 페이지 2

{카테고리_이름} DLS D-Series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DLS D-Series 4 페이지. Dls d-series loudspeaker owners guide
DLS D-Series에 대해서도 마찬가지입니다: 소유자 매뉴얼 (4 페이지)

페이지 인쇄

Introduction!

Please read this manual fully before unpacking and installing the product. It will help you to opti-

mise the performance of your speakers.

Unpacking and maintenance

Your speaker should be treated with the same care you would treat a piece of furniture. Use only

a piece of soft cloth and a small quantity of warm soapy water to clean the loudspeakers. Avoid

touching the cone of the bass unit or treble dome since this may leave a finger mark or even

damage the dome and spoil its performance. After unpacking, we suggest you retain all packing

material for future transports.

Running-in period

The performance of the speaker will change subtly during the listening period.

Please allow your new speakers to play about 50 hours of music at normal listening level before

doing any critical listening.

Room positioning

2-Channel stereo

The performance of a loudspeaker system in a

room varies with placement. Ideal positioning of

the speakers are 3-4 m apart and preferably at

least 0.5-1m away from side and rear walls, se

fig. 1. Avoid distances from walls that correspond

to 1/2, 1/4, 1/6 etc., of the room dimensions.

Seek instead odd fractions; 1/3, 1/5, 1/7 etc.to

minimize effects of room related resonances.You

will perceive the most accurate sound picture if

you listen from a position halfway between the

loudspeakers, and three to four metres away

Avoid corner placement as it leads to colouration

and an over-emphasise of the lower frequen-

cies. Image stability and stereo perception is

increased if the two speakers are turned slightly

towards the listening position. Try this out and

listen for best stereo image and centre focus.

Objects in the direct sound path can disturb the

coherence of the sound picture. Try out different

positions before deciding on a final arrangement.

Marking by the "CE" symbol indicates compliance of this device with the EMC

(Electromagnetic Compatibility) and LVD (Low Voltage Directive) standards of

the European Community

This product must be returned to the separate col lec tion system for electronic

products. Do not dis po se this product together with general household waste.

Fig.1