Alvarez ACM50 설치 지침 매뉴얼 - 페이지 2

{카테고리_이름} Alvarez ACM50에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alvarez ACM50 2 페이지. For use with the alvarez system 600t mkii preamp/eq

INSTALLATION INSTRUCTIONS

Cutaway view of

inside-back of guitar

PIEZO

AUX

OUTPUT

1. Remove the two flathead screws

fastening the System 600T MKII.

Remove the module from the

instrument. (Do NOT remove the

four small Phillips screws on the

System 600T MKII bracket ring.)

2. Using the spring clip, attach the

ACM50 to a back brace. Position

the mic to taste. Some players prefer

facing the mic towards the soundhole/

strings to pick up the direct string

sound. Others prefer to position the

microphone to reproduce the internal

sound of the guitar.

3. Plug the 3.5mm stereo plug from the

Alvarez ACM50 into the AUX input

on the back of the System 600T MKII.

(The ring of the plug supplies power

to the microphone.)

4. Reinstall the System 600T MKII while

making sure all connections are intact

and all excess wire is not obstructing

the functions of the instrument.

5. Set the LEVEL control to -20. If the

level control is set to 0dB, distortion

may occur.

6. Using the AUX control on the System

600T MKII, adjust the gain to the

desired setting relative to the level of

the bridge Piezo pick-up.

7. Use the Master Volume control to set

combined level.