DLS 125 빠른 시작 매뉴얼 - 페이지 2
{카테고리_이름} DLS 125에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DLS 125 4 페이지. Car audio speakers
DLS 125에 대해서도 마찬가지입니다: 매뉴얼 (4 페이지), 소유자 매뉴얼 (4 페이지), 빠른 시작 (2 페이지), 빠른 시작 (2 페이지)
페이지 인쇄
SPEAKER FACTS FOR DLS CLASSIC SERIES
Model
Woofer
Mid
125
13 cm / 5,25"
126
16,5 cm / 6,5"
1269
6 x 9"
224
10 cm / 4"
225
13 cm / 5,25"
226
16,5 cm / 6,5"
269
6 x 9"
50 mm 16 mm / 0,63"
257
5 x 7"
424
10 cm / 4"
425
13 cm / 5,25"
426
16,5 cm / 6,5"
428
20 cm / 8"
457
5 x 7"
960
6 x 9"
50 mm 20 mm / 0,8"
962
6 x 9"
B5
13 cm / 5,25"
B6
16,5 cm / 6,5"
C4
10 cm / 4"
C5
13 cm / 5,25"
C6
16,5 cm / 6,5"
C36
16,5 cm / 6,5"
4"
RUNNING-IN PERIOD
Allow the speakers to play for at
least 15-20 hours. After this time the
performance is correct.
SPEAKER PHASING
To be sure to have the correct speaker polarity (phase) you can
check this by using a 1,5 Volt battery.
Connect a cable from the battery plus-pole to the speaker plus,
and a cable from the battery minus to the speaker minus.
If the speakers are correctly connected the speaker cone should
move outwards on both right and left channel.
This check must be made on the cables going from the speakers,
to the output terminals of your car stereo or amplifier.
Filter installation and connection of coaxial
speakers 424, 425, 426 and 457
Red +
Black -
Blue +
Tweeter
Nom.
Max
power
power
16 mm / 0,63"
50 W
80 W
16 mm / 0,63"
50 W
80 W
50 mm / 2"
60 W
120 W
16 mm / 0,63"
50 W
80 W
16 mm / 0,63"
50 W
80 W
16 mm / 0,63"
50 W
80 W
80 W
120 W
16 mm / 0,63"
50 W
80 W
20 mm / 0,8"
50 W
80 W
20 mm / 0,8"
60 W
90 W
20 mm / 0,8"
60 W
90 W
25 mm / 1"
80 W
120 w
20 mm / 0,8"
60 W
90 W
80 W
120 W
25 mm / 0,8"
80 W
120 W
16 mm / 0,63"
50 W
80 W
16 mm / 0,63"
50 W
80 W
20 mm / 0,8"
50 W
80 W
20 mm / 0,8"
50 W
80 W
20 mm / 0,8"
60 W
90 W
20 mm / 0,8"
60 W
90 W
FILTER/CROSSOVER INSTALLATIONS
Speaker
connection and
tweeter level
select:
Use the red, blue and black
cables to connect between
the filter box and speaker
terminal. Note the speaker
terminal colour marking.
Select tweeter level by
moving the jumper inside
the filter box between high /
low. Make your own tests
for best result.
Car stereo or
amplifier
Sensi-
Magnet
Inst.
tivity
size
depth
92 dB
70 mm / 2,75"
50 mm / 1,97"
92 dB
80 mm / 3,15"
28 mm / 2,28"
92 dB
80 mm / 3,15"
75 mm / 3"
93 dB
70 mm / 2,75"
50 mm /1,97"
92 dB
80 mm / 3,15"
54 mm / 2,12"
92 dB
80 mm / 3,15"
52 mm / 2"
92 dB
100 mm / 3,94"
80 mm / 3,15"
92 dB
80 mm / 3,15"
60 mm / 2,36"
94 dB
80 mm / 3,15"
58 mm / 2,28"
93 dB
90 mm / 3,54"
61 mm / 2,4"
94 dB
100 mm / 4"
62 mm / 2,44"
94 dB
105 mm / 4,1"
87 mm / 3,43"
93 dB
100 mm / 4"
58 mm / 2,28"
93 dB
100 mm / 4"
83 mm / 3,27"
93 dB
100 mm / 4"
83 mm / 3,27"
91 dB
80 mm / 3,15"
63 mm / 2,48"
91 dB
80 mm / 3,15"
63 mm / 2,48"
92 dB
70 mm / 2,75"
58 mm / 2,28"
93 dB
80 mm / 3,15"
60 mm / 2,36"
93 dB
80 mm / 3,15"
63 mm / 2,48"
93 dB
80 / 70 mm
63 / 58 mm
CONNECTION OF SPEAKERS
For speakers with integrated filters
you just connect like this. Make sure
the polarity is correct for both left
and right side.
Filter installation and connection of coaxial
speakers 962 and 428
Car stereo or
amplifier
Mounting
hole
120 mm / 4,72"
145 mm / 5,7"
150x220 mm / 5,9x8,7"
102 mm / 4"
120 mm / 4,72"
145 mm / 5,7"
150x220 mm / 5,9x8,7"
130 x 185 mm / 5,1x7,3"
102 mm / 4"
117 mm / 4,6"
145 mm / 5,7"
185 mm / 7,282
130 x 185 mm / 5,1x7,3"
150x220 mm / 5,9x8,7"
150x220 mm / 5,9x8,7"
117 mm / 4,6"
146 mm / 5,75"
102 mm / 4"
120 mm / 4,72"
156 mm / 5,75"
146 / 102 mm
+
-
Car stereo or
amplifier
Red +
Black -
Blue +
On the cable filter box
without screw terminals
the level select is made
on
the
connecting the green
cable to either the red
or yellow one coming
out from the box.
Tweeter level select:
High level: Connect
green and red wire.
Low level: Connect
green and yellow wire.
Crossover
Integrated
Integrated
Integrated
Integrated
Integrated
Integrated
Integrated
Integrated
Separate box
Separate box
Separate box
Separate box
Separate box
Integrated
Separate box
Separate LP/HP
Separate LP/HP
Cable filter
Cable filter
Cable filter
Separate box
+
-
outside
by