3M MP410 사용자 설명서 - 페이지 4

{카테고리_이름} 3M MP410에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3M MP410 8 페이지. Mobishow for android
3M MP410에 대해서도 마찬가지입니다: 빠른 설정 (1 페이지), 사용자 설명서 (18 페이지), 사양 (2 페이지), 사용자 설명서 (8 페이지)

페이지 인쇄

3M™Mobile Projector MP410

MobiShow for Android® smartphone

MobiShow is an application that runs on your Android® smartphone and transmits still images or presentations to the

3M MP410 projector. The MobiShow is only used for a wireless connection.

projector using a cable, you can use the built-in video out feature of your phone.

Installing MobiShow from Google® play

Connect to the internet and open the Google Play web page.

In the search bar, type mobishow.

Click the <INSTALL> button to download and install the MobiShow application.

Follow the instructions to finish the installation.

Connecting your Android® smartphone to the 3M MP410 network

Before you can transmit images to the 3M MP410 projector using MobiShow, you must connect your Android®

smartphone to the 3M MP410 wireless network.

Plug the 3M USB Wireless Adapter into the USB port on 3M MP410.

Turn on the projector and the wireless startup screen will appear automatically in a few moments.

Note: You may see the multimedia screen for a moment while the projector switches modes.

If the wireless startup screen does not appear, follow these steps to switch the projector's input source to USB.

Otherwise go to step 4.

Press the Menu button on the Projector

Press the Down arrow to select the second row in the menu.

Press the right arrow until USB appears.

Press OK

On your Android smartphone, enable the Wi-Fi feature and connect to the 3M MP410 from the list of available

Wi-Fi networks.

If you are connecting your phone to the