aion Cadmus 빠른 시작 매뉴얼 - 페이지 2
{카테고리_이름} aion Cadmus에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. aion Cadmus 9 페이지. Dual-stage boost
페이지 인쇄TABLE OF CONTENTS
1 Project Overview
2 Introduction & Usage
INTRODUCTION
The Cadmus Dual Boost is based on the ZVEX Super Duper, which is two of their SHO boost circuits in
series and independently switchable.
The SHO is an extremely simple MOSFET booster, small enough that even two of them together have
fewer components than most single effects.
The Super Duper is similar in concept to the
control. That effect is more of an overdrive while this is a two-stage clean boost, though with both
stages engaged this one can get into clipping if desired.
The Cadmus is a direct clone of the Super Duper with no added features other than pull-down resistors
on each input to help prevent popping.
Note that since the channels are identical to individual SHO circuits, the two gain controls exhibit the
characteristic "crackle" of the SHO when they are adjusted, since they are directly biasing the MOSFETs.
This is normal.
USAGE
The Cadmus has three knobs:
• Gain A controls the amount of gain in the first boost.
• Gain B controls the amount of gain in the second boost.
• Volume controls the gain at the output of the second boost stage. It is disabled when Channel B is
disengaged.
CADMUS DUAL BOOST
9 Licensing
Box of
Rock, which adds a 3rd SHO stage as well as a tone
2