ACP AXP20MK 지침서 - 페이지 4
{카테고리_이름} ACP AXP20MK에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. ACP AXP20MK 6 페이지.
페이지 인쇄5. Left Side of Oven
a) Remove 3 screws from LH partition panel and remove panel - see figure 7.
b) Remove terminal block mounting screw.
c) Remove grounding nut and ground wire, then remove ground lug from base.
d)
Remove secondary interlock switch assembly by removing screw and sliding switch off
of hinge .
Terminal
Block Screw
Partition Panel
Screw
Ground Lug
e) Remove secondary interlock switch mounting bracket cover by removing two cover
screws and lifting cover off of secondary - see figure 8.
Important: Note the position of the alignment tab before removing cover bracket.
ACP, Inc.
225 – 49TH Avenue Drive SW
Cedar Rapids, IA 52404
Partition Panel
Screw
Figure 7
Cover Screws
Alignment Tab
Figure 8
Partition Panel
Screw
Secondary Interlock
Screw
PART #: 16200051
REV. 1
DATE: 9-6-12
Page 4 OF 6