aion Lab Series 매뉴얼 - 페이지 2

{카테고리_이름} aion Lab Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. aion Lab Series 15 페이지.
aion Lab Series에 대해서도 마찬가지입니다: 매뉴얼 (20 페이지), 매뉴얼 (20 페이지)

1 Project Overview

3 Usage & Circuit Design Notes

The L5 Preamp Drive Channel is an adaptation of the second channel of the Lab Series

originally released in 1976 and discontinued in 1981.

The Lab Series L5 amp was designed to compete with the Fender Twin Reverb, and the first channel was

specifically designed to be Fender-inspired. However, the second channel was completely original from

the ground up, with active tone controls, a parametric midrange, and a unique (and patented) multi-pole

fixed EQ called the "Multifilter".

The drive channel of the L5 was most famously used by Ty Tabor on the first four Kings X albums. (BB

King also used these amps, but only the clean channel, for which we have a

This project recreates the entire signal path of the drive channel except for the multifilter-including

the OTA overdrive, compressor and master volume. It also runs on the same +/-15V voltage as the

original unit. The only change we've made is to convert the input stage from inverting to non-inverting.

This reduces the noise, but the way we've designed it, the input impedance and frequency response are

exactly the same as the original amp's "Lo" input (the higher-gain mode designed for guitar).

The clean channel is available as a separate project, and like this one, it recreates the entire signal path

of the first channel. The full

L5 PREAMP DRIVE CHANNEL

L5 Preamp pedal

is still available.

15 Licensing

different

L5 amplifier,

project.)

TABLE OF CONTENTS