10-8 Video Digital Evidence Solutions 10-8 Body Camera 사용자 설명서 - 페이지 9

{카테고리_이름} 10-8 Video Digital Evidence Solutions 10-8 Body Camera에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 10-8 Video Digital Evidence Solutions 10-8 Body Camera 13 페이지.
10-8 Video Digital Evidence Solutions 10-8 Body Camera에 대해서도 마찬가지입니다: 사용자 설명서 (13 페이지)

페이지 인쇄

Operation

Charging the Battery

There are three ways to charge your 10-8 BC-1 Body Camera:

• 120 Volt Charger (Fastest Charge Rate)

• 12 Volt car charger (Fast)

• USB cable connected to a powered USB computer port (Slow)

A new, or completely drained BC-1 Body Camera battery can

take 6-8 hours to charge fully.

Charging Battery with USB Cable

1. Connect a USB cable with a compatible connector to a computer.

2. Connect the USB cable to the USB port on the body camera.

Battery Status Icons

Low Power

Not Fully Charged

During charging the LED Status Indicator will light up red, the LCD

screen will display "MSDC" and the battery icon. After 10 seconds the BC-1

Body Camera will enable the screensaver for the LCD. Press any button on

the BC-1 Body Camera to exit the screensaver.

When the battery is fully charged, the red LED Status Indicator will turn

off and the battery status icon will display the "Fully Charged" icon.

Fully Charged

Factory Reset

Press and hold both the "Power" and "REC" buttons to reset the BC-1

Body Camera to its factory defaults.

Caution: Do not perform a Factory Reset while recording or while

the device is connected to a computer. Doing so may cause file

corruption and/or damage the internal memory.

Changing BC-1 Body Camera Password

The BC-1 Body Camera has its own internal password, or PIN, that

protects its files from being accessed by a computer without permission.

Changing BC-1 Body Camera PIN

1. Connect the BC-1 Body Camera to a computer using the USB cable.

2. Create a file "UK.txt" on your computer with a text editor such as

Notepad. Do not use a word processor such as Microsoft Word. It will

introduce data that will corrupt the file.

3. Add the following line to the first line of the file:

UK 0000 1111

In this example we have set the PIN to "1111", feel free to set it to any

four (4) digit number.

4. Save the file to the root folder of the BC-1 Body Camera.

5. Disconnect and restart the BC-1 Body Camera.

Operation