aion ZIRCON SILICON FUZZ 매뉴얼 - 페이지 5

{카테고리_이름} aion ZIRCON SILICON FUZZ에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. aion ZIRCON SILICON FUZZ 10 페이지.

BUILD NOTES

Setting the bias trimmer

The bias trimmer sets the gain and saturation of Q3, and is interactive with the external gain control.

It's recommended to set the external Gain control to halfway, and then adjust the Bias trimmer until the

gating (i.e. the complete cutoff of signal, including background noise, when not playing) goes away. In

other words, you won't hear this gating effect once it's biased.

However, this is just a starting point and you may be able to get some interesting sounds by playing with

the bias!

Transistor outlines

Two different sets of footprints have been provided for each of the transistors, either standard TO-92 or

vintage TO-18 metal can (e.g. 2N2222A). Each outline is connected together on the PCB, so you can use

either the top or bottom one in each pair, but not both.

ZIRCON SILICON FUZZ