aion Dryad Transparent Overdrive 매뉴얼 - 페이지 5

{카테고리_이름} aion Dryad Transparent Overdrive에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. aion Dryad Transparent Overdrive 10 페이지.

BUILD NOTES

C5/C6 and C11/C12 capacitors

The Silver Kiss uses 4.7uF tantalum capacitors (C6 and C12) as signal couplers immediately after both

of the op-amp stages. We recommend keeping tantalum capacitors out of the signal path wherever

possible. This PCB includes space for an alternate film capacitor (C5 and C11) in each of these positions,

in which case C6 and C12 can be omitted entirely.

Due to the low source impedance of the op-amp stages, 1uF is more than enough to pass all useful

bass frequencies. However, if you want to stick as closely as possible to the original circuit, use 4.7uF

tantalum capacitors for C6 and C12 and omit C5 and C11.

DRYAD TRANSPARENT OVERDRIVE