AKO 226.0420 Series 설치 및 서비스 지침 - 페이지 4
{카테고리_이름} AKO 226.0420 Series에 대한 설치 및 서비스 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AKO 226.0420 Series 10 페이지. Temperature regulator selfactuated, three-way temperature regulator with interior thermostat, balanced, with flange connections
페이지 인쇄
Mounting and Servicing Instructions
AKO Temperature Regulator selfactuated
3. Scope of Application
The use of AKO Temperature Regulators is applicable to all branches of industry in which it
is necessary to control systems, i.e. cooling systems and can be used as divider or mixing
valves. They are characterised by the fact that they are relatively maintenance free, are very
service friendly and that they are not sensitive to pressure. The inner parts can be exchanged
immediately without having to disassemble the regulating valve from the pipe. The AKO
Thermostats require no auxiliary energy whatsoever.
- Refer to the data sheet for applications, limits on use and possibilities.
- Certain media require or preclude the use of special materials.
- The valves are designed for standard operating conditions. If conditions exceed
these requirements, e.g. aggressive or abrasive media, the operator should
state the higher requirements when ordering
- Valves made from grey cast iron are not authorized for the use in systems subject to
TRD 110.
The Temperature Regulators can be used selectively as flow divider or mixing valve.
-
Mounting of the temperature regulator
for the regulation of the medium-inlet
temperatures as flow divider, e.g.
A
B
C
-
Mounting of the temperature regulator
for the regulation of the medium-outlet
temperatures as mixing valve, e.g.
A
B
C
The path descriptions A, B and C have been cast on the housing
Friedrich-Sertürner-Straße 14 • D-51377 Leverkusen • Tel.: +49 (0) 214 / 840599-0 • Fax: +49 (0) 214 / 840599-29
from the motor
to the motor (by-pass)
to the cooler
to the motor
from the motor (by-pass)
from the cooler
AKO Regelungstechnik GmbH & Co KG
eMail: [email protected] • Web: http://www.ako-regelungstechnik.de
4