aion TERMINA 매뉴얼 - 페이지 7

{카테고리_이름} aion TERMINA에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. aion TERMINA 10 페이지.

DRILL TEMPLATE

Cut out this drill template, fold the edges and tape it to the enclosure. Before drilling, it's recommended

to first use a center punch for each of the holes to help guide the drill bit.

Ensure that this template is printed at 100% or "Actual Size". You can double-check this by measuring

the scale on the printed page.

Top jack layout assumes the use of closed-frame jacks like the

open-frame jacks, please refer to the Open-Frame Jack Drill Template for the top side.

LED hole drill size assumes the use of a

size accordingly if using something different, such as a 3mm bezel, a plastic bezel, or just a plain LED.

INCH

TERMINA TRANSPARENT DRIVE

5mm LED

bezel, available from several parts suppliers. Adjust

125B

0.625"

ø3/8"

ø1/2"

OUT

TREBLE

x: -0.65, y: +1.71

ø9/32"

CLIP

x: 0, y: +1.06

VOLUME

ø1/4"

x: -0.65, y: +0.41

x: 0.65, y: +0.41

ø9/32"

CENTER (0,0)

LED

FOOTSWITCH

x: -0.775, y: -1.20

x: 0, y: -1.20

ø5/16"

ø15/32"

Switchcraft

111X. If you'd rather use

ø3/8"

BASS

x: 0.65, y: +1.71

ø9/32"

GAIN

ø9/32"