BluCube CXCL Series 사용 설명서 및 설치 설명서 - 페이지 7

{카테고리_이름} BluCube CXCL Series에 대한 사용 설명서 및 설치 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. BluCube CXCL Series 13 페이지. Circular, flush-mount, in-wall/in-ceiling loudspeakers

페이지 인쇄
Unit 12, Teddington Business Park
Station Road
TEDDINGTON, TW11 9BQ
Phone: 020 8977 8633
Installing your loudspeakers during a new construction/
renovation
If you are installing your flush-mount BluCube loudspeakers during a renovation or new
construction, you will probably have the benefit of exposed joists, ceilings and stud walls.
This makes the running of the speaker cables very much more straightforward.
The mounting surfaces used should be at least 10mm thick to ensure safety and speaker
stability.
Your BluCube loudspeakers come with pre-construction brackets. These can be optionally
used to assist with installation. They can be nailed or stapled between the joists or studs in
the planned speaker position with the flange of the speaker cutout facing out.
As the plasterboard is fitted you will find it easier to accurately cut out the necessary hole
for your BluCube loudspeaker reducing installation time and debris when the speakers are
being fitted.
Installing your loudspeakers in an existing construction
If you are installing your flush-mount BluCube loudspeakers after a renovation or new
construction has been completed, installation may be a little more challenging as you may
have to fish cables to minimise any disruption to the decor of your home.
Note: Wirelessly Controlled amplifiers. The use of wireless amplifiers (such as those found
in the Sonos® Music System) will greatly assist the installation of flush-mount speakers
in homes where construction is already completed. For instance, if you are wishing to
install your BluCube loudspeakers in upstairs rooms, consider whether the attic space is a
suitable location for your amplifier. This would greatly reduce the cable runs required and
almost certainly avoid redecoration needs. Alternatively, consider whether the cables may
be run across the attic and down into an adjacent room.
If you wish to install your BluCube loudspeakers in downstairs rooms, identify their desired
positioning and consider what room is above this location. For instance, maybe it is a
bedroom and maybe it is possible to lift the carpet and floorboards to access the void and
hence to enable the cable runs to the speakers below. It may then be possible to locate the
amplifier conveniently in the room above
The benefit of using wireless technology in this context is the ability to locate the amplifiers
in locations that will minimise the need for disruption to and redecoration of the wall or
ceiling surfaces. For more information visit: www.blucubespeakers.co.uk/sonos.