BluDot SHALE Series 조립 노트 - 페이지 2

{카테고리_이름} BluDot SHALE Series에 대한 조립 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. BluDot SHALE Series 2 페이지. Wall mount

WWW.BLUDOT.COM

TO MAKE SURE EACH

OF THE THREE CABINET

HANGERS WITHIN THE CONSOLE

LATCH OVER THE WALL BAR,

EXTEND THE CABINET HANGER

BRACKETS BY TURNING THE

FRONT ADJUSTMENT SCREW

COUNTER CLOCKWISE.

Bottom adjustment

screw changes the

pitch of the console.

Rotate screw

clockwise to move

the console up.

Cabinet hanger

bracket

will fit over

wall bar.

Visually inspect

that each cabinet

wall bar

hanger bracket is

latched to the

wall bar.

Front adjustment

screw changes the

yaw of the console.

Rotate screw clockwise

to move the console

closer to the wall.

TO EFFECTIVELY CHANGE

THE POSITION OF THE CON-

SOLE, ADJUSTMENT SCREWS

MUST BE CHANGED ON

ALL THREE OF THE CABINET

HANGERS. USE A LEVEL TO

CHECK FOR SQUARENESS. IF

SAGGING OCCURS ADJUST

CENTER CABINET HANGER

SHALE WALL MOUNT rev00 - PAGE 2 OF 2