Blue Angel Pumps 50TK 사용 설명서 및 부품 설명서 - 페이지 3

{카테고리_이름} Blue Angel Pumps 50TK에 대한 사용 설명서 및 부품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Blue Angel Pumps 50TK 17 페이지. Portable utility pump
Blue Angel Pumps 50TK에 대해서도 마찬가지입니다: 사용 설명서 및 부품 설명서 (8 페이지)

페이지 인쇄

MAINTENANCE

Let pump cool for at least 20 minutes before

attempting to service. Motor MAY be extremely

hot. Personal injury MAY result.

Pump should be checked periodically for proper operation.

ALWAYS disconnect the electrical supply before

attempting to operate, service, or perform any

maintenance. If the power source is out of sight, lock and tag in the open

(off) position to prevent unexpected power application. Failure to do so

WILL result in fatal electrical shock. Only qualified electricians SHOULD

repair this unit. Improper repair WILL result in fatal electrical shock.

BRUSH REPLACEMENT

Brushes for this pump SHOULD be inspected

after 100 hours of operation.

Pumps with excess of 100 hours of operation may stop operating

or fail to start. This could be due to worn brushes or carbon build-

up. The brushes should be removed and carbon removed. Worn

brushes are not covered under warranty. Replacement brushes may

be available from Blue Angel Pumps. Call 1-888-636-6628 to order.

Disconnect electrical cord from power supply.

Remove brush caps with screwdriver.

Remove old brush assembly.

Replace brushes, make sure springs do not pinch during

assembly. Align/center tabs on the back of the brush spring

with the flats on the brush hlder. REF. fig3.

Replace brush caps.

For other problems, consult troubleshooting chart.

NOTES

__________________________________________________________

50TK