DNF Controls 2MCE-24P 사용자 설명서 - 페이지 12
{카테고리_이름} DNF Controls 2MCE-24P에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DNF Controls 2MCE-24P 19 페이지. Two machine, cuts only editor with 24p editing capability
페이지 인쇄i.
ONE MACHINE AUTOEDIT
1)
2)
3)
4)
5)
12
2MCE-24P, Two Machine, Cuts Only Editor
Select the RECORDER VTR.
Record mode must be Assemble or Insert.
Set the IN point by manually entering a time using the numeric keyboard.
OR
By pressing [IN] and marking the current tape time.
Set OPTIONAL OUT point using the same procedure as IN.
OR
Set the OPTIONAL OUT point by pressing [SHIFT] + [OUT].
The display will show the current PLAYER duration.
Manually enter the desired duration using the numeric keypad.
Press [OUT] to save the entered duration.
OR
Press [ESC] to exit without saving the entered duration.
Press [AUTOEDIT].
The recorder will preroll to the IN point.
The second line of the display will say "Prerolling---."
The recorder will be put into PLAY mode.
At the IN Point, the recorder will go into Record.
The second line of the display shows "AUTO EDIT."
At the OUT point, the recorder goes out of Record and does a 2-second postroll,
then goes into STOP mode.
Press [STOP] at anytime to abort the autoedit.