Blue Bamboo P25-M 빠른 설치 매뉴얼 - 페이지 9

{카테고리_이름} Blue Bamboo P25-M에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Blue Bamboo P25-M 11 페이지. Bluetooth printer

2. Remove the battery pack.

2.3.2 Battery and charge

1．Insert the DC plug of power adaptor into the power jack of printer;

2．Insert the AC plug of power adaptor into AC power supply;

3．Start battery charge, and red LED light continuously;

4．Finish charging, the red LED turn off.

Warning:

Notice:

1. If the red LED turns on for a short time and then turn off quickly when starting the battery

charge procedure, there are two probable reason: first is you have completed battery charging,

no need to charge again, second is this battery doesn't work, please change it.

2. The red LED should turn on during charging and turn off after charging, please care for its

status is right or not.

P25M Installation Guide

Figure 7: Remove battery

Battery recharge

Figure 8:

http://www.bluebamboo.com