DNF Controls 4000CL-MAV-PBIO 사용자 설명서 - 페이지 16
{카테고리_이름} DNF Controls 4000CL-MAV-PBIO에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DNF Controls 4000CL-MAV-PBIO 20 페이지. 250 clip fast access system with peripheral bus interface option for sony mav-555 video servers
DNF Controls 4000CL-MAV-PBIO에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지)
페이지 인쇄18. FUNCTION TABLE
Function
GOTO ENTERED
[SHIFT] + [RECUE]
TIME
FFWD
[FFWD]
JOG
[JOG]
LAST CUE
[LAST CUE]
NEXT CUE
[NEXT CUE]
RECORD
[REC]
REWIND
[RWD]
SHUTTLE
[SHUTTLE]
SLOMO
[SLOMO]
SLO-MO SPEED
[SHIFT] + [SLOMO]
PRESET
STOP
[STOP]
GANG VTRs
[SHIFT] + [VTR #1]
OR
[SHIFT] + [VTR #2]
OR
[SHIFT] + [VTR #3]
OR
[SHIFT] + [VTR #4]
TIME MODE
[TIME MODE]
SELECT
LOOP CLIP
[LOOP ENABLE]
16 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option
Key Press
Search the VTR to the manually entered time.
Use the ST300 numeric keypad.
Press [ENTER] or [RECUE].
Press and HOLD to shuttle. Release key to stop. Set WIND
Speed in MENU.
Select JOG mode and enable Wheel.
Step to the previous Cue Point Location.
Step to the next Cue Point Location.
Places VTR into the Record mode selected by RECORD
MODE in the SETUP MENU.
Press [RECORD] or [RECORD] + [PLAY].
Press and HOLD to shuttle. Release key to stop. Set WIND
Speed in MENU.
Select SHUTTLE mode and enable Wheel.
Press [SLOMO] to slo-mo the VTR. Turn the Wheel (or move
the T-Bar if available) to change the play speed. Press
SLOMO] to STILL frame.
OR
Press any transport key to exit SLOMO.
For WHEEL ONLY: Press [SHIFT] + [SLOMO] to preset the
slo-mo speed. Turn the Wheel to select desired speed. Press
[ESC] or any transport key to exit.
Press once to STILL frame VTR.
Press again to put VTR into STOP mode.
Press and Hold [SHIFT]. Then when lights go out, press VTR
keys to include in the gang. Press [SHIFT] to escape gang
setup mode. Flashing LED indicates VTR or HDD being
monitored for status.
Press to toggle between Timecode (TC), VITC (VT) or Tape
Timer (TM) display modes.
Press to loop a clip.
Description